Hitabot KH 50-06-9C-86L

Overview of HitabotHitabot fully resolves the intrinsic high-temperature problem of traditional heat staking machines,first developed in 2015, and has been structurally and functionally upgraded annually.It is a core component of KDM's heat staking machines.The Hitabot brand is protected by trademark, with 12 registered designs and 4 patents,protecting design and technology respectively.Also, it has achieved European Conformity Certification to ensure product reliability.Hitabot structureComparison between existing heat staking machines and Hitabot[1] Operation near Softening Point during plastic moldingOperating above softening point degrades mechanical properties and weakens fixationWith traditional heat staking machines, molded plastic rivets appear glossy with burrsWith Hitabot, they are glossy and burr-free[2] No preheating requiredHitabot achieves preheating/stabilization within 5 minutes after power on via PID controlTraditional heat staking requires 30 minutes or more[3] Simple structure and minimized power consumptionTraditional heat staking uses heating block method requiring insulation and cooling nozzleHitabot uses a molding jig-focused heating method, reducing external heat lossPower consumption minimized and can be mounted directly to equipment using a bracketHitabot molding jig at 200°C keeps bracket around 50°C for maintenance during heatingHitabot ApplicationsTechnical Certifications, Design Registration, European Conformity, KDM development records areFor more, refer to KDM Homepage www.heatstaking.co.kr